A914/A914M-92(1999)e1 |
对末端淬火淬透性有限制要求的钢棒材技术规范 |
Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
A915/A915M-93(2003) |
化学要求同锻件类似的碳素钢和合金钢 |
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades |
A917-00 |
要求每一面标识有镀层质量用的电解工艺涂层的薄钢板材标准规范 |
Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
A918-00 |
要求在每一面标识有涂层质量用电解工艺镀锌镍合金的薄钢板技术规范 |
Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
A920/A920M-02a |
具**械特性,微合金,热锻,高质量钢棒的标准规范 |
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
A921/A921M-93(1999) |
后热锻用微合金,高质量,热锻钢棒的标准规范 |
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
A922-93(2000) |
硅金属标准规范 |
Standard Specification for Silicon Metal |
A923-03 |
检测锻制双重奥氏体/铁素体不锈钢中有害金属间相的标准试验方法 |
Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels |
A924/A924M-04 |
用热浸镀法对薄钢板金属涂层的一般要求的标准规范 |
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
A925-03 |
锌-5%铝.混合稀土合金涂覆钢的地面金属绞线的技术规范 |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand |
A926-03 |
波纹形金属管用比较涂层材料磨损阻力的标准测试方法 |
Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe |
A927/A927M-99 |
使用伏特计-电流计-瓦特计方法的环形铁芯交流磁性能的标准试验方法 |
Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method |
A928/A928M-04 |
加填料金属电熔焊铁素体/奥氏体(二联)不锈钢管标准规范 |
Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
A929/A929M-01 |
波纹钢管用的经热浸处理的金属镀覆薄钢板标准规范 |
Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
A930-03 |
涵洞,暴雨下水道和其它地下的排水道用波形金属管的寿命周期费用分析的标准惯例 |
Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits |
A931-96(2002) |
金属丝绳和绞线拉伸试验的标准试验方法 |
Standard Test Method for Tension Testing of Wire Ropes and Strand |
A932/A932M-01 |
用瓦特计-安培计-伏特计和薄钢板样品测试在电源频率下非晶体材料交流磁性能的标准试验方法 |
Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens |
A933/A933M-95(2001) |
加筋增强用聚氯乙烯涂层钢丝和焊接钢丝网的标准规范 |
Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement |
A934/A934M-04 |
环氧基树脂涂覆的预制增强钢棒的标准规范 |
Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars |
A937/A937M-01 |
使用临界试验面测定绝缘涂层层间阻力的标准测试方法 |
Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces |
A938-97(2003) |
丝材抗扭试验的标准试验方法 |
Standard Test Method for Torsion Testing of Wire |
A939-96(2001) |
圆柱体锻件镗孔表面反射超声检测的标准试验方法 |
Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
A940-96(2001) |
涡轮转子用的差温热处理真空处理钢锻件,合金钢锻件的标准规范 |
Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
A941-04a |
钢,不锈钢,有关合金和铁合金术语 |
Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
A942-95(2001) |
离心铸造白口铁/灰口铁双金属耐磨滚轮外壳标准规范 |
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells |
A943/A943M-01 |
喷模制无缝奥氏体不锈钢管的技术规范 |
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
A944-99(2004) |
用梁端试样与混凝土比较的钢筋棒结合强度标准试验方法 |
Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens |
A945/A945M-00 |
为改良可焊接性、可加工性及粘接性用低碳限硫的高强度低合金结构钢板的标准规范 |
Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness |
A946-95(2000) |
耐腐蚀和耐热用铬,铬-镍和硅合金钢板,薄板和带的标准规范 |
Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service |
A947M-95(2000) |
织构化不锈钢薄板的标准规范 |
Standard Specification for Textured Stainless Steel Sheet [Metric] |
A949/A949M-01 |
喷模制无缝铁素体/奥氏体不锈钢管的标准规范 |
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
A950/A950M-99(2003) |
涂有熔融胶接环氧树脂的结构钢H型钢桩和薄板桩技术规范 |
Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
A951-02 |
砌体接缝配筋的技术规范 |
Standard Specification for Masonry Joint Reinforcement |
A952/A952M-02 |
锻制80号和100号钢提升元件和焊接联接杆技术规范 |
Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links |
A953-02 |
奥氏体铬镍硅合金钢无缝和焊接管件的标准规范 |
Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing |
A954-02 |
奥氏体铬镍硅合金钢无缝和焊接管的标准规范 |
Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe |
A955/A955M-04ae1 |
混凝土增强的变形的和无节钢筋技术规范 |
Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement |
A956-02 |
钢制品依阔提皮(Equotip)硬度测试方法 |
Standard Test Method for Leeb Hardness Testing of Steel Products |
A957-03 |
一般工业用普通要求熔模铸造的钢及合金钢熔模铸件技术规范 |
Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
A958-00 |
拉伸要求及化学要求类似于标准铸造等级的碳钢和合金钢铸件的技术规范 |
Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades |
A959-03 |
锻制不锈钢用说明协调标准等级构成的标准指南 |
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
A960/A960-04a |
普通要求的锻制钢管管件的标准规范 |
Standard Specification for Common Requirements for Wrought Steel Piping Fittings |
A961-04 |
管路用钢法兰盘,锻制管接头,阀门和零件的通用要求规范 |
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications |
A962/A962M-04 |
预定用于从低温至蠕变范围内任何温度的钢紧固件或其材料的通用要求 |
Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range |
A964/A964M-03 |
波纹钢箱形涵洞规范 |
Standard Specification for Corrugated Steel Box Culverts |
A965/A965M-02e1 |
压力和高温零件用奥氏体钢锻件的技术规范 |
Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
A966/A966M-96(2001) |
用交流电和磁粉探伤检验钢锻件的标准试验方法 |
Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
A967-01e1 |
不锈钢零件的化学钝化处理的技术规范 |
Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts |
A968/A968M-96(2001) |
和耐热耐蚀设备用铬,铬镍及硅合金钢棒材及型材的技术规范 |
Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service |
A970/A970M-04ae1 |
混凝土配筋用焊接或锻制镦头的棒材技术规范 |
Standard Specification for Headed Steel Bars for Concrete Reinforcement |
A971-00 |
测量扁平轧制的钢盘条轧边锥(斜)度和凸度的标准试验方法 |
Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils |
A972/A972M-00 |
熔焊的环氧树脂涂层的管桩规范 |
Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles |
A973/A973M-01 |
100级的合金钢链条规范 |
Standard Specification for Grade 100 Alloy Steel Chain |
A974-97(2003) |
焊线纤维金属筐和金属丝网的标准规范.(金属涂层或聚氯乙烯(PVC)涂层) |
Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
A975-97(2003) |
双层和扭转网眼金属筐和护墙垫金属和涂层钢线或聚氯乙烯(PVC)金属涂层钢线 |
Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
A976-03 |
按照成份、相对绝缘能力及用途对绝缘涂层进行分类方法 |
Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application |
A977/A977M-02 |
用磁滞曲线图测定高矫顽力*磁性材料磁性的标准试验方法 |
Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs |
A978/A978M-97(2002)e1 |
重力流动卫生用排污管道,暴雨排污管道用和其他**的预涂层的和聚乙烯衬料带由复合材料加强肋的钢管规范 |
Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications |
A979/A979M-03 |
外场用波纹钢结构件中填装的混凝土铺料和衬料规范 |
Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field |
A980-97(2003) |
冷轧**高强度碳素钢薄钢板技术规范 |
Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled |
A981-97(2002) |
评定加预应力地锚使用的270号、直径为15.2毫米(0.6英寸)加预应力连铸钢坯结合强度的标准试验方法 |
Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors |
A982-02 |
涡轮叶片用不锈钢锻件技术规范 |
Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
A983/A983M-04 |
中速柴油发动机用连续晶粒流向锻制的碳素钢及合金钢曲轴技术规范 |
Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
A984/A984M-03 |
电阻焊焊接的平滑端黑钢管技术规范 |
Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded |
A985/A985M-04a |
容压件使用的熔模钢铸件通用技术要求 |
Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts |
A986/A9786M-01 |
连续晶粒流向曲轴锻件的磁粉探伤检查技术规范 |
Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings |
A987-00 |
镀锡薄钢板轧制产品形状特性测量的标准试验方法 |
Standard Test Method for Measuring Shape Characteristics of Tin Mill Products |
A988-98(2002) |
高温下使用的热等静加压成形的不锈钢法兰盘、管配件、阀及零件的技术规范 |
Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
A989-98(2002) |
高温下使用的热等静加压成形的合金钢法兰盘、管配件、阀及零件的技术规范 |
Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
A990-03 |
耐腐用保压零件用特殊控制阀的铁铬镍和铬合金铸件技术规范 |
Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service |
A991/A991M-98 |
钢制品热处理炉温度均匀度测量标准试验方法 |
Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products |
A992/A992M-04 |
建筑框架中使用的结构成型件钢规范 |
Standard Specification for Structural Steel Shapes |
A993-98 |
铸铁的动扯裂试验到确定传递温度的标准试验方法 |
Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature |
A994-04 |
钢,不锈钢及相关合金的产品规范编辑程序和格式指南 |
Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys |
A995/A995M-98(2003) |
容压件用奥氏体-铁素体(用二联法)不锈钢铸件技术规范 |
Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
A996/A996M-04 |
混凝土用条钢和车轴钢变形钢棒规范 |
Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
A997-98(2003) |
熔模铸件目视检查表面验收标准的标准惯例 |
Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination |
A998/A998M-98(2003) |
下水道及相关用途的工厂加工的波纹钢管的加强型接头的结果设计指南 |
Standard Practice for Structural Design of Reinforcements for Fittings in Factory—Made Corrugated Steel Pipe for Sewers and Other Applications |
A999/A999M-04a |
合金钢和不锈钢管通用要求规范 |
Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
A1000-99 |
弹簧**碳钢和合金钢钢丝规范 |
Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
A1001-01 |
大型材高强度钢铸件规范 |
Standard Specification for High Strength Steel Castings in Heavy Sections |
A1002-99(2003) |
镍铝类合金铸件规范 |
Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
A1003/A1003M-02a |
具有金属及非金属涂层的冷处理成型结构件碳钢板规范 |
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
A1004/A1004M-99(2004) |
确定用于冷成形的框架构件的金属,被涂覆的金属,和非金属涂覆钢板材的较小预期腐蚀特性的标准惯例 |
Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
A1005/A1005M-00e1 |
双埋弧焊、带纵向的和螺旋状的缝、平头钢管规范 |
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
A1006/A1006M-00 |
激光束焊、平头、无镀层、钢制总管的标准规范 |
Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded |
A1007-02 |
钢索用碳钢丝规范 |
Standard Specification for Carbon Steel Wire for Wire Rope |
A1008/A1008M-04b |
高强度低合金和改性高强度低合金冷轧结构碳钢板材规范 |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
A1009-00 |
高频(10kHz-1 MHz)电力变压器和滤波感应器用软磁MnZn铁芯材料标准规范 |
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications |
A1010/A1010M-01e1 |
更高强度马氏体不锈钢板,薄板和带的技术规范 |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
A1011/A1011M-04a |
高强度低合金和改型高强度低合金热轧结构碳钢板材和带材规范 |
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
A1012-02 |
无缝铁索体,奥氏体和二联合金钢冷凝器和带整体散热片的热交换管的规范 |
Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
A1013-00 |
用伏特计、安培计和瓦特计测定可控温度下软磁芯部件的高频(10 kHz-1 MHz)磁芯损耗的标准试验方法 |
Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method |
A1014-03 |
高温下使用的沉淀硬化螺栓连接材料规范(UNS N07718) |
Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service |
A1015-01 |
公共卫生设备管道产品可视管道镜检查指南 |
Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
A1016/A1016M-04a |
铁索体合金钢,奥氏体合金钢和不锈钢钢管的通用要求规范 |
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
A1017/A1017M-01 |
压力容器铬-钼-钨合金钢板规范 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
A1018/A1018M-04 |
含铌或钒的高强度低合金和改性高强度低合金热轧厚镀锡卷板结构碳钢板材和带材规范 |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability |
A1019/A1019M-01 |
下水道和排水管路用的有聚合物滤料层36英寸(900mm)或以下尺寸的加肋筋密闭钢管规范 |
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains |
A1020/A1020M-02 |
锅炉,过热器,热交换器和冷凝器用熔焊碳和碳锰钢管规范 |
Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
A1021-02 |
高温下使用的马氏体不锈钢锻件和锻料规范 |
Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service |
A1022-01 |
用于混凝土加固的变形和未变形的不锈钢钢筋和焊接钢筋规范 |
Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
A1023/A1023M-02 |
通用绞结起来的碳钢丝索规范 |
Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes |
A1024/A1024M-02 |
无缝平头黑色钢管线标准规范 |
Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
A1025-02 |
通用铁合金规范 |
Standard Specification for Ferroalloys, General Requirements |
A1026-03 |
建筑结构用合金钢结构型材规范 |
Standard Specification for Alloy Steel Structural Shapes for Use in Building Framing |
A1028-03 |
涡轮螺旋桨和压缩机用不锈钢棒材规范 |
Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils |
A1030/A1030M-03 |
镀层薄板的光滑性的测定惯例 |
Standard Practice for Measuring Flatness Characteristics of Coated Sheet Products |
A1031-04 |
热轧厚重锡卷板拉拔和结构合金钢板材和带材规范 |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled |
A1033-04 |
亚共析度碳和低合金钢状态转换的定量测量和报告惯例 |
Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations |
A1034-04 |
测定钢配筋机械连接的试验方法 |
Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
A1035/A1035M-04 |
用于混凝土加固的变形和未变形的低碳含铬棒材规范 |
Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement |
A1036-04 |
用单板测量器测量平轧电工钢的电力频率磁性指南 |
Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers |