A710/A710M-02 |
低碳时效硬化的镍铜铬钼铌合金钢 |
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
A711-04 |
钢锻件坯料 |
Standard Specification for Steel Forging Stock |
A712-97(2002) |
软磁性合金电阻率的测试方法 |
Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys |
A713-04 |
热处理部件用高碳弹簧钢丝 |
Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
A714-99(2003) |
高强度低合金焊接钢管和无缝钢管 |
Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
A716-03 |
球墨铸铁涵洞管 |
Standard Specification for Ductile Iron Culvert Pipe |
A717/A717M-01 |
单片样品表面绝缘电阻率的试验方法 |
Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
A719/A719M-02 |
磁性材料的叠装系数的试验方法 |
Standard Test Method for Lamination Factor of Magnetic Materials |
A720/A720M-02 |
无取向电工钢延展性的试验方法 |
Standard Test Method for Ductility of Nonoriented Electrical Steel |
A721/A721M-02 |
取向的电工钢的延展性试验方法 |
Standard Test Method for Ductility of Oriented Electrical Steel |
A722/A722M-98(2003) |
预应力混凝土用无涂覆的高强度钢筋 |
Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete |
A723/A723M-02 |
高强度压力元件用合金钢锻件 |
Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
A724/A724M-04 |
叠层焊接的压力容器用经淬火及回火的碳素钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
A726-00 |
半成品型冷轧磁性迭片级钢 |
Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types |
A727/A727M-02 |
具有固定切口韧性的管道部件用碳素钢锻件 |
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
A729-93(1999) |
货物运输及电气铁路用热处理合金钢轴 |
Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service |
A730-93(1999) |
铁路用碳素钢及合金钢锻件 |
Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use |
A732/A732M-02 |
一般设备用熔模铸造碳素低合金钢及高强度加温钴合金钢铸件 |
Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
A733-03 |
焊接及无缝碳素钢和奥氏体不锈钢管接头 |
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
A734/A734M-87a(2003) |
经淬火和回火的合金钢与高强度低合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered |
A735/A735M-03 |
中温和低温用低碳锰钼钶合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
A736/A736M-03 |
低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
A737/A737M-99 |
高强度低合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
A738/A738M-03a |
中温和低温设备用经热处理的碳锰硅钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
A739-90a(2000) |
升温或/和加压部件用热轧合金钢棒 |
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
A740-98(2003) |
钢丝网(编织或焊接电镀钢丝网) |
Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
A741-98(2003) |
公路护栏用镀锌钢丝绳和配件 |
Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail |
A742/A742M-03 |
波纹钢管用预涂聚合物和金属涂覆钢薄板 |
Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
A743/A743M-03 |
一般用耐腐蚀铬铁及镍铬铁合金铸件 |
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
A744/A744M-00e1 |
严酷条件下使用的耐腐蚀镍铬铁合金铸件 |
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
A745/A745M-94(2003) |
奥氏体钢锻件的超声波检验 |
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
A746-03 |
排污管用球墨铸铁 |
Standard Specification for Ductile Iron Gravity Sewer Pipe |
A747/A747M-99 |
沉淀硬化不锈钢铸件 |
Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
A748/A748M-87(2003) |
压力容器用静态铸造的激冷白口铁-灰口铁双金属轧辊 |
Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use |
A749/A749M-97(2002) |
热轧碳素钢和高强度低合金钢带材通用要求 |
Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
A751-01 |
钢制品化学分析的实验方法、操作和术语 |
Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
A752-04 |
合金钢条和粗圆钢丝 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
A752M-04 |
合金钢条和粗圆钢丝(米制) |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
A753-02 |
镍铁软磁合金 |
Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
A754/A754M-96(2000) |
X射线荧光涂层厚度的试验方法 |
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
A755/A755M-03 |
外露建筑材料用热浸涂覆和用卷涂工艺预涂的钢薄板 |
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
A756-94(2001) |
耐磨不锈轴承钢 |
Standard Specification for Stainless Anti-Friction Bearing Steel |
A757/A757M-00 |
低温下承压设备及其它设备用铁素体和马氏体钢铸件 |
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
A758/A758M-00 |
具有改进的切口韧性的对缝焊锻制碳素钢管配件 |
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
A759-00 |
起重机用碳钢轨条 |
Standard Specification for Carbon Steel Crane Rails |
A760/A760M-01a |
下水道和排水沟用金属涂覆的波纹钢管 |
Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
A761/A761M-04 |
现场栓接管、管拱和拱用波纹镀锌结构钢板 |
Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
A762/A762M-00 |
下水道和排水沟用预涂聚合物波纹钢管 |
Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
A763-93(2004) |
铁素体不锈钢晶间腐蚀敏感性检测 |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
A764-95(2001) |
机械弹簧用冷拉镀锌和按成品尺寸镀锌的碳素钢丝 |
Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
A765/A765M-01 |
具有强制性韧性要求的碳素钢及低合金钢压力容器部件锻件 |
Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
A767/A767M-00b |
钢筋混凝土用镀锌钢筋 |
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
A768-95(2001) |
涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件 |
Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
A769/A769M-00 |
电阻焊钢结构型材 |
Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes |
A770/A770M-03 |
**钢板通过厚度测量进行的抗拉试验 |
Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
A771/A771M-95(2001) |
增殖反应堆堆芯部件用奥氏体不锈钢管 |
Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components |
A772/A772M-00 |
正弦电流用材料的交流磁导率的试验方法 |
Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current |
A773/A773M-01 |
用带直流电子的磁滞曲线记录仪的(B-H)回路法测量材料的磁性能的标准试验方法 |
Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs |
A774/A774M-02 |
低温和中温一般腐蚀情况下用的焊接锻制奥氏体不锈钢配件 |
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
A775/A775M-04a |
涂环氧树脂的钢筋钢棒 |
Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
A778-01 |
焊接未退火的奥氏体不锈钢管形制品 |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
A779/A779M-00 |
预应力混凝土用应力消除未涂覆的密实七股钢丝绞绳 |
Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete |
A780-01 |
热浸镀锌层的损坏及无覆层区域的检修 |
Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
A781/A781M-04a |
一般工业用一般要求的钢和合金铸件 |
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
A782/A782M-90(2001) |
经淬火和回火的锰铬钼硅锆合金钢压力容器板 |
Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
A786/A786M-00b |
轧制钢楼板 |
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
A787-01 |
电阻焊金属涂覆碳素钢机械配管 |
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
A788-04a |
钢锻件 |
Standard Specification for Steel Forgings, General Requirements |
A789/A789M-04a |
普通设备用无缝与焊接铁素体/奥氏体不锈钢管 |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
A790/A790M-04a |
无缝与焊接铁素体/奥氏体不锈钢管 |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
A792/A792M-03 |
热浸工艺法处理的55%铝-锌合金涂覆钢板 |
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
A793-96(2001) |
不锈钢轧制楼板 |
Standard Specification for Rolled Floor Plate, Stainless Steel |
A794-97(2002) |
商品级冷轧碳素钢薄板(较高含碳量为0.16%-0.25%) |
Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled |
A795/A795M-04 |
防火用黑色及热浸镀锌的焊接和无缝钢管 |
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
A796/A796M-04 |
雨水管和卫生污水管及其它地下埋设管道用波纹钢管、管托架及拱形架结构设计惯例 |
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
A798/A798M-01 |
下水道及其它类似用途用工厂制波纹钢管的安装 |
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
A799/A799M-04 |
估算不锈钢铸件铁素体含量用仪表的校准 |
Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content |
A800/A800M-01 |
奥氏体合金钢铸件中铁素体含量的估算 |
Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof |
A801/A801M-99 |
铁钴高磁性饱和合金 |
Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650 |
A802/A802M-95(2001) |
钢铸件外观检验的表面验收标准 |
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
A803/A803M-03 |
焊接铁素体不锈钢给水加热器管 |
Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes |
A804/A804M-04 |
在电力频率下用薄钢板型试样对材料交流磁特性的测试方法 |
Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
A805-93(2002) |
冷轧碳素钢扁平线 |
Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
A807/A807M-02e1 |
下水道及其它类似用途用波纹结构钢涂覆管的安装 |
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |