A576-90b(2000) |
特级热轧碳素钢棒 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality |
A577/A577M-90(2001) |
钢板的超声角波束检验 |
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
A578/A578M-96(2001) |
特殊设备用的普通钢板和包覆钢板的直波束超声探伤检验 |
Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications |
A579-04 |
**高强度合金钢锻件 |
Standard Specification for Superstrength Alloy Steel Forgings |
A580/A580M-98 |
耐热不锈钢丝 |
Standard Specification for Stainless Steel Wire |
A581/A581M-95b(2000) |
高速切削用耐热不锈钢丝和盘条 |
Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
A582/A582M-95b(2000)e1 |
热轧或冷精轧的高速切削不锈及耐热钢棒 |
Standard Specification for Free-Machining Stainless Steel Bars |
A586-98 |
镀锌平行和螺旋形钢丝绳 |
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand |
A587-96(2001) |
化学工业用电阻焊低碳钢管 |
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
A588/A588M-04 |
高强度低合金结构钢4英寸(100mm)厚屈服点较小为50ksi(345MPa) |
Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick |
A589-96(2001) |
水井用无缝和焊接碳素钢管 |
Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe |
A591/A591M-98 |
薄镀层电解镀锌薄钢板 |
Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications |
A592/A592M-04 |
压力容器用经回火和淬火的高强度低合金钢锻制附件和零件 |
Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels |
A595-04 |
结构用圆锥形低碳钢管 |
Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use |
A596/A596M-95(1999) |
用环形试验法和冲击法测定材料的直流磁性能的试验方法 |
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens |
A597-87(1999) |
铸造工具钢 |
Standard Specification for Cast Tool Steel |
A598/A598M-02 |
磁放大器磁芯的磁性能测试法 |
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores |
A599/A599M-02 |
锡制品,电解镀锡的冷滚轧薄板规范 |
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
A600-92a(1999) |
高速工具钢 |
Standard Specification for Tool Steel High Speed |
A601-96(2000) |
电解金属锰 |
Standard Specification for Electrolytic Manganese Metal |
A602-94(2004) |
汽车用可锻铸铁件 |
Standard Specification for Automotive Malleable Iron Castings |
A603-98(2003) |
镀锌结构钢丝绳 |
Standard Specification for Zinc-Coated Steel Structural Wire Rope |
A604-93(2003) |
自耗电极再溶化钢棒与钢坯的宏观腐蚀试验方法 |
Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets |
A606-04 |
改进防大气腐蚀性的热轧和冷轧高强度低合金钢薄板和带材 |
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance |
A608/A608M-02 |
高温受压离心铸造的铁铬镍高合金钢管 |
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures |
A609/A609M-91(2002) |
碳素钢,低合金钢和马氏体不锈钢铸件的超声波检测 |
Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
A610-79(2000) |
尺寸测量用铁合金的取样和试验 |
Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
A612/A612M-03 |
中温和低温压力容器用高强度碳素钢板 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service |
A615/A615M-04a |
钢筋混凝土配筋用变形和光面坯钢筋 |
Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement |
A618-04 |
热成型焊接和无缝高强度低合金结构钢管 |
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
A623-03 |
锡轧制产品 |
Standard Specification for Tin Mill Products, General Requirements |
A623M-03 |
镀锡薄钢板轧制品通用要求(米制) |
Standard Specification for Tin Mill Products, General Requirements [Metric] |
A624/A624M-03 |
锡辊轧制品.单压延电解马口铁 |
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced |
A625/A625M-03 |
一次轧制原钢板(未镀)和镀锡薄钢板轧制产品技术规范 |
Standard Specification for Tin Mill Products, Black Plate, Single Reduced |
A626/A626M-03 |
二次压延电解镀锡厚钢板轧制品技术规范 |
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced |
A627-03 |
安全设备用均质不易加工的钢棒 |
Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities |
A630-03 |
热浸电解镀锡板镀锡层重量测定的方法 |
Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate |
A632-04 |
通用无缝和焊接奥氏体不锈钢管(小直径) |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
A633/A633M-01 |
正火的高强度低合金结构钢 |
Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
A635/A635M-04e1 |
热轧碳素钢薄板,带材和重型粗盘条规格 |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
A636-76(2000) |
氧化镍烧结块 |
Standard Specification for Nickel Oxide Sinter |
A638/A638M-00 |
高温用沉积硬化铁基**级合金棒,锻件及锻坯料 |
Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service |
A640-97(2002)e1 |
8字型缆吊架用镀锌钢丝绳 |
Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable |
A641/A641M-03 |
镀锌(电镀)碳素钢丝技术规范 |
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
A644-98(2003) |
铁铸件的相关术语 |
Standard Terminology Relating to Iron Castings |
A645/A645M-99a |
压力容器用经特殊热处理的5%镍合金钢板 |
Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated |
A646-95(1999) |
飞机及航空器锻件用优质合金钢大方坯及坯段 |
Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings |
A648-04 |
预应力混凝土管用冷拉钢丝 |
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe |
A649/A649M-99(2003) |
波纹纸机械用锻制钢辊规格 |
Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery |
A650/A650M-03 |
二次压延的锡轧黑板材 |
Standard Specification for Tin Mill Products, Black Plate, Double Reduced |
A653/A653M-04a |
热浸处理的镀锌铁合金或镀锌合金薄钢板的标准规范 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
A656/A656M-03 |
具有改良可模锻性的高强度低合金热轧结构钢板 |
Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability |
A657/A657M-03 |
一次和二次压延电解镀铬黑钢板轧制品技术规范 |
Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced |
A659/A659M-97(2001) |
商业级热轧碳素钢薄板和带材(较大含碳量为0.16%-0.25%) |
Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled |
A660-96(2001) |
高温用离心铸造碳素钢管 |
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
A662/A662M-03 |
中温和低温压力容器用锰碳钢板规格 |
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
A663/A663M-89(2000) |
商品级碳素钢棒的机械特性 |
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
A664-99 |
在ASTM规范中对电工钢和层压钢级别的识别 |
Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications |
A666-03 |
退火或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁棒 |
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
A667/A667M-87(2003) |
离心铸造的双金属(灰口及白口铸铁)圆柱体 |
Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders |
A668/A668M-04 |
一般工业用碳素钢和合金钢锻件 |
Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
A671-04 |
常温和较低温用电熔焊钢管 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
A672-96(2001) |
中温高压用电熔焊钢管 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
A673/A673M-04 |
结构钢冲击试验的取样程序 |
Standard Specification for Sampling Procedure for Impact Testing of Structural Steel |
A674-00 |
水或其它液体用球墨铸铁管的聚乙烯包装 |
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
A675/A675M-03 |
**热轧碳素钢棒的机械特性 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
A677/A677M-99 |
全处理型无取向电工钢 |
Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
A678/A678M-00a |
结构用经回火和淬火的高强度低合金碳素钢板规格 |
Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates |
A679/A679M-00 |
硬(冷)拉高抗拉强度钢丝 |
Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
A681-94(1999) |
合金工具钢 |
Standard Specification for Tool Steels Alloy |
A682/A682M-02 |
弹簧用冷轧高碳钢带材 |
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For |
A683/A683M-99 |
半处理型无取向电工钢 |
Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
A684/A684M-86(2002) |
冷轧高碳钢带材 |
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
A686-92(1999) |
碳素工具钢 |
Standard Specification for Tool Steel, Carbon |
A688/A688M-03 |
焊接的奥氏体不锈钢给水加热器管 |
Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
A689-97(2002) |
弹簧用碳素钢及合金钢棒 |
Standard Specification for Carbon and Alloy Steel Bars for Springs |
A690/A690M-00a |
在海洋环境中使用的高强度低合金工字形钢桩和薄板桩规格 |
Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments |
A691-98(2002) |
高温下高压装置用电熔焊碳素钢和合金钢管 |
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
A693-03 |
沉淀硬化耐热不锈钢板、薄板和带材 |
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A694/A694M-03 |
高压传输设备用碳素钢及合金钢管法兰、配件、阀门及零件用锻件 |
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
A696-90a(2000) |
压力管道部件**热锻或冷精轧碳素钢棒 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
A697/A697M-03 |
用伏特计、安培计和瓦特计法测定迭层铁芯样品的交流磁特性的试验方法 |
Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods |
A698/A698M-02 |
在弱交流磁场中磁屏蔽效率的试验方法 |
Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields |
A700-99e1 |
钢制品国内装运的包装、标记和装载方法 |
Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment |
A701-96(2000) |
硅锰铁 |
Standard Specification for Ferromanganese-Silicon |
A702-89(2000) |
热锻钢栅栏柱和组件 |
Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought |
A703/A703M-04a |
受压部件用钢铸件 |
Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
A704/A704M-01 |
混凝土加筋用焊接普通钢棒或杆的光面钢筋或钢筋网 |
Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
A705/A705M-95(2000) |
时效硬化的不锈和耐热钢锻件 |
Standard Specification for Age-Hardening Stainless Steel Forgings |
A706/A706M-04a |
混凝土配筋用变形低合金光面无节钢筋 |
Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
A707/A707M-02 |
低温设备用锻制碳素钢和合金钢法兰 |
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
A709/A709M-04 |
桥梁用结构钢 |
Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges |