A289/A289M-97(2003) |
发电机非磁性定位环用合金钢锻件的技术规范 |
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators |
A290-02 |
减速器环用碳素钢和合金钢锻件 |
Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears |
A291-03 |
减速器小齿轮、齿轮和心轴用碳素钢和合金钢锻件 |
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
A295-98 |
高碳耐磨轴承钢技术规范 |
Standard Specification for High-Carbon Anti-Friction Bearing Steel |
A297/A297M-97(2003) |
一般用耐热铬铁与镍铬铁合金钢铸件规格 |
Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application |
A299/A299M-04 |
压力容器用锰硅碳钢板 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
A302/A302M-03 |
压力容器用锰钼和锰钼镍合金钢板 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
A304-04 |
有末端淬火淬透性要求的合金钢棒材的技术规范 |
Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
A307-04 |
抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范 |
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
A308/A308M-03 |
经热浸处理镀有铅锡合金的薄板材的技术规范 |
Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
A309-01 |
用三点试验法测定长镀锌薄钢板镀层的重量成分的试验方法 |
Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
A311/A311M-04 |
**械性能要求的消除应力的冷拉碳素钢棒 |
Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements |
A312/A312M-04a |
无缝和焊接奥氏体不锈钢管 |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A313/A313M-03 |
不锈钢弹簧丝技术规范 |
Standard Specification for Stainless Steel Spring Wire |
A314-97(2002) |
锻造用不锈及耐热钢坯及钢棒规格 |
Standard Specification for Stainless Steel Billets and Bars for Forging |
A319-71(2001) |
高温无压部件用灰铁铸件 |
Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts |
A320/A320M-04 |
低温用合金钢螺栓材料规格 |
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service |
A321-90(2001) |
经淬火和回火的碳素钢棒 |
Standard Specification for Steel Bars, Carbon, Quenched and Tempered |
A322-91(2001)e1 |
合金钢棒材.级别 |
Standard Specification for Steel Bars, Alloy, Standard Grades |
A323-93(2000) |
硼铁规格 |
Standard Specification for Ferroboron |
A324-73(2000) |
钛铁合金 |
Standard Specification for Ferrotitanium |
A325-04a |
经热处理较小抗拉强度为120/105ksi的热处理钢结构螺栓 |
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength |
A325M-04a |
经热处理较小抗拉强度为830Mpa的热处理钢结构螺栓 |
Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric] |
A327-91(1997) |
铸铁冲击试验方法 |
Standard Test Methods for Impact Testing of Cast Irons |
A327M-91(1997) |
铸铁冲击试验方法(米制) |
Standard Test Methods for Impact Testing of Cast Irons (Metric) |
A328/A328M-03 |
薄钢板桩 |
Standard Specification for Steel Sheet Piling |
A333/A333M-04a |
低温用无缝与焊接钢管规格 |
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service |
A334/A334M-04a |
低温设备用无缝与焊接碳素和合金钢管 |
Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
A335/A335M-03 |
高温用无缝铁素体合金钢管 |
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
A336/A336M-03a |
压力与高温部件用合金钢锻件规格 |
Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts |
A338-84(2004) |
铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件 |
Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
A340-03a |
有关磁性试验用符号和定义的术语 |
Standard Terminology of Symbols and Definitions Relating to Magnetic Testing |
A341/A341M-00 |
用直流磁导计和冲击试验法测定材料的直流磁性能的试验方法 |
Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods |
A342/A342M-99 |
磁铁材料导磁率的试验方法 |
Standard Test Methods for Permeability of Feebly Magnetic Materials |
A343/A343M-03 |
在电力频率下用瓦特计-安培计-伏特计法(100-1000赫兹)和25 厘米艾普斯亭(EPSTEIN) 机架测定材料的交流电磁性能的试验方法 |
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame |
A345-98 |
磁设备用平轧电炉钢 |
Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications |
A348/A348M-00 |
用瓦特计--安培计--伏特计法(100-10000赫兹)和25厘米艾普斯亭框测定材料的交流磁性能的试验方法 |
Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame |
A350/A350M-04 |
要求进行缺口韧性试验的管道部件用碳素钢与低合金钢锻件技术规范 |
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
A351/A351M-03 |
容压零件用奥氏体及奥氏体铁素体铸铁的技术规范 |
Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts |
A352/A352M-03 |
低温受压零件用铁素体和马氏体钢铸件规格 |
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
A353/A353M-93(1999) |
压力容器用经二次正火及回火处理的含9%镍的合金钢板 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered |
A354-04 |
淬火与回火合金钢螺栓,双头螺栓及其他外螺纹紧固件规格 |
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
A355-89(2000) |
渗氮用合金钢棒 |
Standard Specification for Steel Bars, Alloys, for Nitriding |
A356/A356M-98(2003) |
蒸汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件 |
Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
A358/A358M-04 |
高温用电熔焊奥氏体铬镍合金钢管 |
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A363-03 |
地面架空线用镀锌钢丝绳 |
Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
A367-60(1999) |
铸铁的激冷试验方法 |
Standard Test Methods of Chill Testing of Cast Iron |
A368-95a(2000) |
不锈钢和耐热钢丝绳的标准 |
Standard Specification for Stainless Steel Wire Strand |
A369/A369M-02 |
高温用锻制和镗孔碳素钢管和铁素体合金钢管 |
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
A370-03a |
钢制品机械测试的标准试验方法和定义 |
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
A372/A372M-03 |
薄壁压力容器用碳素钢及合金钢锻件 |
Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
A376/A376M-02a |
高温中心站用无缝奥氏钢管 |
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
A377-03 |
球墨铸铁压力管规范索引 |
Standard Index of Specifications for Ductile-Iron Pressure Pipe |
A380-99e1 |
不锈钢零件、设备和系统的清洗和除垢 |
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
A381-96(2001) |
高压输送用金属弧焊钢管 |
Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
A384/A384M-02 |
防止钢组件热浸镀锌时翘曲和扭曲用安全保护 |
Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies |
A385-03 |
提供高质量镀锌覆层(热浸) |
Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
A387/A387M-03 |
压力容器用铬钼合金钢板 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
A388/A388M-03 |
重型钢锻件超声波检测 |
Standard Practice for Ultrasonic Examination of Heavy Steel Forgings |
A389/A389M-03 |
适合高温受压部件用经特殊热处理的合金钢铸件规格 |
Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service |
A390-95(2001) |
饲养家禽用镀锌钢丝栏栅网(六角形和直线形) |
Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
A391/A391M-01 |
80号合金钢链条 |
Standard Specification for Grade 80 Alloy Steel Chain |
A392-03 |
镀锌钢丝链环栏栅网 |
Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
A394-04 |
传动塔架用镀锌和裸露钢螺栓 |
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
A395/A395M-99e1 |
高温用铁素体球墨铸铁受压铸件 |
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
A400-69(2000) |
钢棒的成分及机械性能选择指南 |
Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
A401/A401M-03 |
铬硅合金钢丝 |
Standard Specification for Steel Wire, Chromium-Silicon Alloy |
A403/A403M-04 |
锻制奥氏体不锈钢管配件 |
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
A407-93(2004) |
盘簧用冷拉钢丝 |
Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
A409/A409M-01 |
腐蚀场所或高温下使用的焊接大口径奥氏体钢管 |
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
A411-03 |
镀锌低碳钢铠装线 |
Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire |
A413/A413M-01 |
碳素钢链 |
Standard Specification for Carbon Steel Chain |
A414/A414M-04 |
压力容器用碳素薄钢板 |
Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels |
A416/A416M-02 |
预应力混凝土用无涂层七股钢铰线 |
Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete |
A417-93(2004) |
之字形、方形、正弦形家具用弹簧元件用冷拔钢丝 |
Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units |
A418-99(2003) |
涡轮机及发电机钢转子锻件的超声波检查方法 |
Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
A420/A420M-04 |
低温下用锻制碳素钢和合金钢管配件 |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
A421/A421M-02 |
预应力混凝土用无涂层消除应力钢丝的技术规范 |
Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete |
A423/A423M-95(2000) |
无缝和电焊低合金钢管 |
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
A424-00 |
搪瓷用钢薄板 |
Standard Specification for Steel, Sheet, for Porcelain Enameling |
A426/A426M-02 |
高温用离心铸造的铁素体合金钢管 |
Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
A427-02 |
冷轧和热轧用锻制合金钢辊 |
Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
A428/A428M-01 |
钢铁制品上铝覆层重量的测试方法 |
Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
A434-04 |
热轧与冷精轧经回火及淬火的合金钢棒 |
Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered |
A435/A435M-90(2001) |
钢板的直射束纵向超声波检验 |
Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
A436-84(2001) |
奥氏体灰口铁铸件 |
Standard Specification for Austenitic Gray Iron Castings |
A437/A437M-01a |
高温用经特殊处理的涡轮型合金钢螺栓材料 |
Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service |
A439-83(1999) |
奥氏体可锻铸铁铸件 |
Standard Specification for Austenitic Ductile Iron Castings |
A447/A447M-93(2003) |
高温用镍铬铁合金钢铸件(25-12级) |
Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service |
A449-04a |
经淬火和回火的钢螺栓和螺柱 |
Standard Specification for Quenched and Tempered Steel Bolts and Studs |